Or you can use your existing wiring. The light bar comes with: control box and bracket kit. Dimensions: 60" long x 5" wide x 1.5 thick. Sits 3.25 tall with brackets.
Box: 7.75"long x 1" thick x2.25height. Connect Red to 12volt positive and black to 12volt negative. By clicking the Flash Patterns Button, surf through 17 flash patterns. Flashes the same as the front. The rear lights change to 3 functions which can go Left directional, Right directional or Center Out.How to hook up light bar to existing wiring. There is a negative and positive wire coming into the control box for power. There are three wires going to the light bar. Cut the wire about 12" off the light bar and 12" off the control box. Dedicate three of your existing wires to splice in between.
Now you just saved yourself a lot of time not having to rewire. Call Autodirectsave if you have any questions. You can run the wire through the right side or the left side of the vehicle. The black support brackets have holes for bolting down. Comes with brackets for older trucks with rain gutters located under roof line that holds the rubber molding.
New vehicles without rain gutters: grind off the rivets or cut the end piece off the bracket. Bend the bracket to the shape of the roof. Drill 2 holes underneath the roof jam and secure with stainless screws. The item "60 LED AMBER LIGHT BAR ROLL BACK TOW Flat Bed Truck EMS PILOT CAR TURN SIGNAL" is in sale since Tuesday, June 21, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bars".
The seller is "autodirectsave" and is located in Lake Elsinore, California. This item can be shipped to United States, Canada, Mexico, Bermuda.